學習宣傳貫徹黨的二十大精神專題 “十四五”規劃專題 保定校區 English

模塊化多電平變換器的建模與控制

來源:發布時間:2023-11-17

【讲座题目】模塊化多電平變換器的建模與控制

【时  间】2023年11月22日   下午:14:00-15:20

【地  点】北京校区  主楼D260集会室

【主講人】李澤元,美國國家工程院院士、中國工程院外籍院士

【主講人簡介】

李泽元教授(Fred C. Lee)于1968年在台湾国立乐成大学获得电气工程学士学位,随后于1972年和1974年划分在杜克大学获得电气工程硕士和博士学位。李泽元教授是弗吉尼亚理工大学的名誉特聘教授,也是弗吉尼亚理工大学电力电子研究中心(CPES)的首创人和名誉主任。作为CPES的学术带感人,李教授主持了一系列项目,涵盖了研究、技术开发、教育推广、工业相助和技术转移。CPES致力于满足行业需求,推动其研究和结果应用于工业。迄今为止,全球凌驾250家公司受益于该研究中心的工业相助项目。由于其在工业相助、技术转移、教育和推广等方面的孝敬,CPES被美国国家科学基金会(NSF)评为模范工程研究中心(ERC)。李教授的研究偏向为高频功率变换、磁性和电磁滋扰、漫衍式电力系统、可再生能源、电能质量、以及高密度电子封装、集成、建模和控制。李教授拥有107项美国专利,并宣布了凌驾340篇期刊论文和790多篇经过评审的技术论文。在弗吉尼亚理工大学任职期间,李教授指导了90名博士和94名硕士学生完成学业。李教授是美国国家工程院院士、中国工程院外籍院士。凭据Research.com网站上的D-Index排名,李教授是电子与电气工程学科的世界顶尖学者之一。

Fred C. Lee received his B.S. degree in electrical engineering from the National Cheng Kung University in Taiwan in 1968, and his M.S. and Ph.D. degrees in electrical engineering from Duke University in 1972 and 1974, respectively.Dr. Lee is a University Distinguished Professor Emeritus and Founder and Director Emeritus of CPES, a preeminent academic center in power electronics research at Virginia Tech.  As CPES Director, Dr. Lee led a program that encompasses research, technology development, educational outreach, industry collaboration, and technology transfer.  CPES focuses its research on meeting industry needs and allows industry to benefit from the Center&/xshd/39;s research and outputs.  To date, more than 250 companies worldwide have benefited from the industry partnership program.  The center has been cited by NSF as a model ERC for its industry collaboration and technology transfer, education, and outreach programs.Dr. Lee&/xshd/39;s research interests include high-frequency power conversion, magnetics and EMI, distributed power systems, renewable energy, power quality, high-density electronics packaging and integration, and modeling and control.Dr. Lee holds 107 U.S. patents and has published over 340 journal articles and over 790 refereed technical papers.  During his tenure at Virginia Tech, Dr. Lee has supervised to completion 90 Ph.D. and 94 Master&/xshd/39;s students.Dr. Lee is a member of the U.S. National Academy of Engineering, and a foreign member of the Chinese Academy of Engineering in the People’s Republic of China.  According to Research.com D-Index ranking, Dr. Lee is among the world’s top scholars within the discipline of Electronics and Electrical Engineering.

【報告內容簡介】

模塊化多電平變換器(MMC)被認爲是可再生能源與現有公用事業電網之間的關鍵接口技術,然而當前MMC控制複雜且不直觀。由于MMC系統狀態量遠大于控制量,爲最小化其內部環流而拓展的控制模糊不清。若沒有對MMC進行合適的建模和控制,MMC在運行時會産生大宗環流,導致大體積儲能電容器被過度使用。接纳狀態平面剖析技術,以圖形方法給出了MMC兩種類型的環流,一種與MMC輸入和輸出能量交換有關,另一種與MMC內上下橋臂能量交換有關。别的,兩個功率流本質上是正交的,這意味著各個功率路徑上的控制獨立。因此,接纳坐標轉換,建立了解耦的等效電路模型,獨立控制治理各個功率流,明確了消除環流的要领。

Modular multilevel converter is deemed the key interface technology between renewable energy sources and the existing utility power grids. However, the interface control currently deployed is rather complicated and counterintuitive. Since the systems states are far greater than the means of control, the extend of control to minimize the circulating energy was rather ambiguous. Without proper modeling and control, this system is often operated with large circulating energy, resulting in excessive use of the bulky energy storage capacitors.

Employing state-plane analysis techniques, two types of circulating energies are delineated graphically, one related to the energy exchange between input and output, and the other related to the energy swapping between upper arm and lower arm. Furthermore, these two power flows are orthogonal in nature, implying that the means of control for each power flow path are independent. Consequently, a coordinate transformation is employed, leading to a decoupled equivalent circuit model. Each power flow path is governed by it’s own control law. Methods of eliminating circulating energy are clearly identified.

sitemap网站地图
sitemap网站地图
友情链接:凯发k8娱乐官网  凯发k8娱乐官网  凯发k8娱乐官网